Fill-rite FR313 REMOTE PUMPS Manuel d'utilisateur télécharger pdf (Page 2)

Dear Fill-Rite Customer,

Congratulations on your purchase of a Fill-Rite Remote

Pump. We at Fill-Rite have built our worldwide reputation by

designing the finest and most reliable pumps available in

todays market.

Your new pump was designed with pride by some of the best

and most experienced fluid control experts available. We use

the most advanced technology possible to give you a pump

with the superiority you deserve and the quality youve come

to expect from Fill-Rite products.

George P. Jenkins

President

GENERAL DESCRIPTION

SAFETY

The Fill-Rite Series 700B UL listed remote pumps are positive

displacement, direct drive, rotary vane pumps. Depending on

installation and product viscosity, these pumps can deliver up

to 18 gallons of fluid per minute. Their rugged, yet lightweight

design makes for a long life of trouble free operation.

The Fill-Rite Series 300 UL listed pumps are positive

displacement, direct drive, rotary vane pumps. Depending on

installation and product viscosity, these pumps can deliver up

to 30 gallons/114 liters of fluid per minute. Their high quality,

trouble free design makes them a reliable, long life, high

capacity pump.

The safety of Fill-Rite Series 700B and 300 pumps is proven

by their listing with

Underwriters Laboratories Inc., a nationally

recognized independent organization for

testing of products to ensure public safety. Also

recognized in Canada.

Model FR713 Design Features:

Inlet: 2" male NPT on bung, 1¼" female NPT on suction

pipe

Outlet: ¾" NPT

Built in check valve, bypass and pressure relief valves.

(Anti-siphon device prevents thermal expansion pressure

buildup.)

CAUTION: DO NOT INSTALL ADDITIONAL FOOT

VALVE OR CHECK VALVE DURING INSTALLATION

WITHOUT PRESSURE RELIEF VALVE. HOUSING

OR PLUMBING CRACKING MAY RESULT.

Overall Dimensions: 14" (35.6cm) wide x 11" (28cm) high x

12" (30.5cm) deep

Explosion proof motor

1/3 HP 115 VAC-60Hz motor, 1725 RPM, 5.5 amps at 115 VAC

Thermal overload protection

Ball bearing construction; no greasing or oiling required

Model FR713 Performance:

22 psi (1.52 bar) maximum outlet pressure

Maximum flow rate: up to 18 GPM (68 LPM)

Maximum viscosity of fluid pumped: diesel fuel

Maximum operating ambient temperature: 150°F (65.6°C)

Minimum operating ambient temperature: -15°F (-27°C)

(Consult factory for extreme temperature applications)

Minimum dry vacuum: 12" (30.5cm) of mercury

Minimum suction lift: 10' (3m) for gas & 15' (4.5m) for diesel

fuel. The lift in feet is equivalent to the vertical distance from

the surface of the fluid in the tank to the inlet of the

pump, PLUS the friction losses through the vertical and

horizontal runs of pipe, all elbows and other fittings.

Systems should be designed to require a minimum

amount of suction lift.

TECHNICAL INFORMATION

To ensure safe and efficient operation, it is essential to

read and follow each of these warnings and

precautions.

1. To prevent damage to FR713 pump, do not operate

without the check valve (700F2661) or the check

valve substitute (700F2679) in place.

2. Do NOT smoke near pump or use pump near an open

flame. Fire could result.

3. Take motors needing service to an authorized

repair shop or return to factory to maintain

explosion proof integrity.

4. These pumps must be used with remote

dispensers and are not intended for any other

applications.

5. The pump motor is equipped with thermal overload

protection. If overheated, it will shut itself off without

any damage to the windings. Be sure to turn off the

pump power if this occurs. As the motor cools, it will

start without warning if power is on.

DANGER

Electrical wiring should be

done by a licensed electri-

cian in accordance with ap-

proved electrical codes.

Pump should be properly

grounded and a rigid conduit

should be used when install-

ing electrical wiring. Im-

proper use or installation of

this product can cause seri-

ous bodily injury or death.

SAFETY INSTRUCTIONS

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Fill-rite FR313 REMOTE PUMPS Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Fill-rite FR313 REMOTE PUMPS